Installing BSP under DOS and/or Windows
Pnp (Plug 'n Play) BIOS
Note: Most computers should support PnP by default så you
can probably skip the
following unless you have tested the simulator ports and they failed
to work.
If you are running under real mode DOS and NOT under Windows you
do NOT need
to install drivers for the Bailine card but instead you need to
make sure PnP is enabled in
the computer's BIOS.
In most BIOSes you set the option 'PnP OS' to 'Off', on some computers
you disable
'Quick Boot', but other methods possible exist as well.
With PnP enabled the computer should show a list of the detected
PnP devices when you
reboot.
For further information refer to www.bailine.com/faq
|